Antenna switch 6x2
429 € without controller
544 € with Controller 6x2
Prices include VAT (gross).
Designed to handle 6 antennas from 2 radios at the same time. Ideal for SO2R operation and every flavor of Multi-Operator setup — but if you simply use two radios and a few antennas interchangeably, this product is for you too.
Two-color LED signaling on the switch shows immediately which antenna is currently in use by which radio. Inside, a mechanical lock physically prevents both radios from using the same antenna at the same time — this is a hardware safeguard, so there’s no risk of a glitch damaging a final stage.
More about this device –> Our blog <–
Key Features:
- Two independent radios, six shared antennas
- Two-color LEDs show which antenna is currently in use
- Mechanical lock physically prevents both radios from selecting the same antenna at once
- Unused antennas automatically grounded
- Elegant black powder-coated housing with high-quality labeling
- Reinforced copper layer on the PCB — less heating, greater reliability at 4 kW
- Works with the Controller 6×2 (manual selection) or MOAS II (full automation)
- Available with UHF or N connectors
Technical data:
- Frequency range: 1-30 MHz
- Maximum power: 4 kW
- Impedance: 50 Ω
- Isolation between ports R1 and R2: >80 dB
- Insertion loss: <0,1 dB
- Maximum SWR: 1:1,12
- Power supply: DC +12 V
- Unused antenna grounded
- Dimensions: 300 x 165 x 62 mm